MIXED • Офіційний вебсайт

MIXED MTB 45mm стебло для 35mm керма алюмінієвий CNC гірський шосейний велосипед компоненти велоспорту деталі

Original price was: €29.85.Current price is: €12.52.
SKU: F8AA1E1A Category:

Інженерна точність зустрічається з сміливою продуктивністю

Піднесіть вашу їзду за допомогою винеса MIXED MTB 45mm для керма 35mm. Виготовлений з топ-класного алюмінію з використанням передового обробки CNC, цей винес перетворює кожну дорогу або стежку на нову пригоду. Ви отримуєте superior міцність без жертви легкістю чи спритністю. Для тих, хто жадає точності, конструкція цього компонента приносить впевненість у кожному повороті та спуску. Тоді як інші винеси можуть йти на компроміси, цей знаходить ідеальний баланс між жорсткістю та витонченістю, даючи вам безперевершений контроль над вашою їздою.

Розкрийте багатогранність на кожному терені

Ваша подорож може вести вас від міських вулиць до суворих гірських стежок, і рульова колонка MIXED MTB 45mm Stem адаптується бездоганно. Його продуманно розроблена довжина 45mm оптимізує вашу керованість, забезпечуючи комфорт, незалежно від того, чи ви катаєтеся по технічних стежках, чи крузите міськими дорогами. Універсальне затиснення 35mm підходить для більшості сучасних кермів, забезпечуючи безперебійну сумісність з різними велосипедами. Крім того, дизайн рульової колонки забезпечує легке встановлення та ідеально поєднується з різними велосипедними компонентами, роблячи модернізацію та регулювання безпроблемним.

Стиль та довговічність у ідеальній гармонії

Довговічність—це ключ для будь-якого серйозного велосипедиста. Алюміній високого класу цього виносу стійкий до зносу та ударів, дозволяючи вам подорожувати далі без турбот. Анодоване покриття запобігає корозії та додає елегантний візуальний вигляд вашій їзді. Чи прагнете ви вразити на наступних змаганнях, чи виразити свою індивідуальність на повсякденних поїздках, цей виніс забезпечує як довготривалу красу, так і продуктивність. Крім того, деталізація ЧПК надає кожному краю різкого, сучасного вигляду, який виділяється в будь-якій групі.

Відчуйте кожну поїздку, переживайте справжній зв'язок

З рульовою колонкою MIXED MTB 45mm Stem ваш велосипед стає продовженням вашого тіла. Кожен рух, від тісного повороту до швидкого прискорення, відчувається природним та інтуїтивним. Оскільки рульова колонка зберігає досконалий баланс між гнучкістю та жорсткістю, втома зменшується, а контроль збільшується. В результаті ви отримуєте підвищене почуття зв'язку, перетворюючи звичайні поїздки на незабутні враження. Оснастіть свій велосипед цією інноваційною деталлю та обійміть новий рівень велосипедної пристрасті з кожною подорожжю.

 

Color

Black

Material

Carbon

Brand

MIXED

Size

‎Large

Weight

0.2

Shop

Aliexpress

5 reviews for MIXED MTB 45mm стебло для 35mm керма алюмінієвий CNC гірський шосейний велосипед компоненти велоспорту деталі

  1. К***ч

    For such a price, it’s hard to complain, probably, but I didn’t like it. The edges are sharp, a thin layer of glossy paint underneath which shows traces of milling, all of this looks cheap. I liked the bolts, M5 for torque, not magnetic but also don’t look like stainless steel, like titanium? In general, 4 stars, I think it’s fair. You can take it if you don’t want to wait for super external parts.

  2. А***а

    I was pleasantly surprised that the version with bolts for Torx T25 (made of stainless steel?) arrived. and branded with the vyse logo on the lid. Although the quality of the finishing is not up to par with the branded ones, it is quite decent, without very sharp edges. The packaging is also great. But the design itself is fundamentally flawed in terms of the ratio of toughness to weight. Despite the overall bulk, due to the design, too much metal was chosen on the rod clamp side, so after degreasing and tightening it to 5nm, it can be twisted with a little effort by hand. I had to stretch it further. You can also see how the metal stretches and deforms when tightening on the rod, and the upper part of the clamp bends relative to the lower part when tightening the anchor bolt. 🙉 But on the steering wheel side, it holds tightly. Adding some meat on the side of the rod, and it would be a working extension with a cool lid design, otherwise, well, who knows.

  3. Б***ч

    The selection of pins on a Alik under 35 steering wheel is quite limited. I needed a 45-50 mm stem. , this one seemed to be the most suitable. There is milling available, the packaging in a branded box was pleasant. To my taste, not the most beautiful stem, but my concept is great on the components from alika and ozone)))

  4. K***k

    Ok

  5. R***o

    Looks good. Dimensions match. The price was on sale. My concerns are the thin wall near the steering pipe and small screws.

Only logged in customers who have purchased this product may leave a review.

For such a price, it's hard to complain, probably, but I didn't like it. The edges are sharp, a thin layer of glossy paint underneath which shows traces of milling, all of this looks cheap. I liked the bolts, M5 for torque, not magnetic but also don't look like stainless steel, like titanium? In general, 4 stars, I think it's fair. You can take it if you don't want to wait for super external parts.
I was pleasantly surprised that the version with bolts for Torx T25 (made of stainless steel?) arrived. and branded with the vyse logo on the lid. Although the quality of the finishing is not up to par with the branded ones, it is quite decent, without very sharp edges. The packaging is also great. But the design itself is fundamentally flawed in terms of the ratio of toughness to weight. Despite the overall bulk, due to the design, too much metal was chosen on the rod clamp side, so after degreasing and tightening it to 5nm, it can be twisted with a little effort by hand. I had to stretch it further. You can also see how the metal stretches and deforms when tightening on the rod, and the upper part of the clamp bends relative to the lower part when tightening the anchor bolt. 🙉 But on the steering wheel side, it holds tightly. Adding some meat on the side of the rod, and it would be a working extension with a cool lid design, otherwise, well, who knows.
The selection of pins on a Alik under 35 steering wheel is quite limited. I needed a 45-50 mm stem. , this one seemed to be the most suitable. There is milling available, the packaging in a branded box was pleasant. To my taste, not the most beautiful stem, but my concept is great on the components from alika and ozone)))
Ok
Looks good. Dimensions match. The price was on sale. My concerns are the thin wall near the steering pipe and small screws.