MIXED • Site-ul Oficial

Potență MIXED MTB 45mm pentru Ghidon 35mm Aluminiu CNC Piese Componente Bicicletă Munte Șosea

Original price was: €29.85.Current price is: €12.52.
SKU: F8AA1E1A Category:

Inginerie de Precizie Întâlnește Performanță Îndrăzneață

Ridicați-vă căldura cu stupul MIXED MTB 45mm pentru ghidon 35mm. Fabricat din aluminiu de cea mai bună calitate folosind prelucrarea CNC avansată, acest stup transformă fiecare drum sau traseu într-o nouă aventură. Obțineți rezistență superioară fără a sacrifica ușurința sau agilitatea. Pentru cei care doresc precizie, construcția acestei componente aduce încredere la fiecare viraj și coborâre. În timp ce alți stupi ar putea face compromisuri, acesta realizează echilibrul final între rigiditate și finețe, oferindu-vă control incomparabil asupra călătoriei dumneavoastră.

Eliberează Versatilitate pe Orice Teren

Călătoria ta poate te duce de la străzile orașului la căi montane aspre, iar pipa MIXED MTB 45mm se adapteaza fără cusur. Lungimea sa gândită cu atenție de 45mm optimizează manipularea, oferind confort indiferent dacă abordezi trasee tehnice sau spui drumuri urbane. Clema universală de 35mm se potrivește cu cele mai multe manete moderne, oferind compatibilitate perfectă pe diferite biciclete. Mai mult, designul pipei asigură instalare ușoară și se combină perfect cu diferite componente de ciclism, făcând upgrade-urile și ajustările fără problemă.

Stil și durabilitate în armonie perfectă

Durabilitatea este esențială pentru orice ciclist serios. Aluminiul de înaltă calitate al acestui tija rezistă uzurii și șocurilor, permițându-ți să mergi mai departe fără griji. Finisajul anodizat respinge coroziunea și adaugă un aspect elegant și modern plimbării tale. Indiferent dacă ai scopul să impresionezi la următoarea competiție sau să-ți exprimi individualitatea în plimbarile zilnice, această tijă oferă atât frumusețe durabilă, cât și performanță. Mai mult, detaliile CNC dau fiecărei margini un aspect ascuțit și modern care iese în evidență în orice grup.

Simțiți Fiecare Ieșire, Experimentați Adevărata Conexiune

Cu pipa MIXED MTB 45mm, bicicleta ta devine o extensie a corpului tău. Fiecare mișcare, de la viraje strânse la accelerație rapidă, se simte naturală și intuitivă. Deoarece pipa menține un echilibru perfect între flexibilitate și rigiditate, oboseala scade și controlul crește. Ca rezultat, câștigi o senzație mai ridicată de conexiune, transformând plimbări obișnuite în experiențe de neuit. Echipează-ți bicicleta cu această piesă inovatoare și cuprinde un nou nivel de pasiune pentru ciclism cu fiecare călătorie.

 

Color

Black

Material

Carbon

Brand

MIXED

Size

‎Large

Weight

0.2

Shop

Aliexpress

5 reviews for Potență MIXED MTB 45mm pentru Ghidon 35mm Aluminiu CNC Piese Componente Bicicletă Munte Șosea

  1. К***ч

    For such a price, it’s hard to complain, probably, but I didn’t like it. The edges are sharp, a thin layer of glossy paint underneath which shows traces of milling, all of this looks cheap. I liked the bolts, M5 for torque, not magnetic but also don’t look like stainless steel, like titanium? In general, 4 stars, I think it’s fair. You can take it if you don’t want to wait for super external parts.

  2. А***а

    I was pleasantly surprised that the version with bolts for Torx T25 (made of stainless steel?) arrived. and branded with the vyse logo on the lid. Although the quality of the finishing is not up to par with the branded ones, it is quite decent, without very sharp edges. The packaging is also great. But the design itself is fundamentally flawed in terms of the ratio of toughness to weight. Despite the overall bulk, due to the design, too much metal was chosen on the rod clamp side, so after degreasing and tightening it to 5nm, it can be twisted with a little effort by hand. I had to stretch it further. You can also see how the metal stretches and deforms when tightening on the rod, and the upper part of the clamp bends relative to the lower part when tightening the anchor bolt. 🙉 But on the steering wheel side, it holds tightly. Adding some meat on the side of the rod, and it would be a working extension with a cool lid design, otherwise, well, who knows.

  3. Б***ч

    The selection of pins on a Alik under 35 steering wheel is quite limited. I needed a 45-50 mm stem. , this one seemed to be the most suitable. There is milling available, the packaging in a branded box was pleasant. To my taste, not the most beautiful stem, but my concept is great on the components from alika and ozone)))

  4. K***k

    Ok

  5. R***o

    Looks good. Dimensions match. The price was on sale. My concerns are the thin wall near the steering pipe and small screws.

Only logged in customers who have purchased this product may leave a review.

For such a price, it's hard to complain, probably, but I didn't like it. The edges are sharp, a thin layer of glossy paint underneath which shows traces of milling, all of this looks cheap. I liked the bolts, M5 for torque, not magnetic but also don't look like stainless steel, like titanium? In general, 4 stars, I think it's fair. You can take it if you don't want to wait for super external parts.
I was pleasantly surprised that the version with bolts for Torx T25 (made of stainless steel?) arrived. and branded with the vyse logo on the lid. Although the quality of the finishing is not up to par with the branded ones, it is quite decent, without very sharp edges. The packaging is also great. But the design itself is fundamentally flawed in terms of the ratio of toughness to weight. Despite the overall bulk, due to the design, too much metal was chosen on the rod clamp side, so after degreasing and tightening it to 5nm, it can be twisted with a little effort by hand. I had to stretch it further. You can also see how the metal stretches and deforms when tightening on the rod, and the upper part of the clamp bends relative to the lower part when tightening the anchor bolt. 🙉 But on the steering wheel side, it holds tightly. Adding some meat on the side of the rod, and it would be a working extension with a cool lid design, otherwise, well, who knows.
The selection of pins on a Alik under 35 steering wheel is quite limited. I needed a 45-50 mm stem. , this one seemed to be the most suitable. There is milling available, the packaging in a branded box was pleasant. To my taste, not the most beautiful stem, but my concept is great on the components from alika and ozone)))
Ok
Looks good. Dimensions match. The price was on sale. My concerns are the thin wall near the steering pipe and small screws.