MIXED • Site Oficial

Avanço MTB MIXED 45mm para Guidão 35mm Alumínio CNC Componentes de Ciclismo Bicicleta Mountain Road

Original price was: €29.85.Current price is: €12.52.
SKU: F8AA1E1A Category:

Precisão Engineering Encontra Desempenho Audacioso

Eleve seu passeio com o Potenciômetro MIXED MTB 45mm para Guidão de 35mm. Fabricado com alumínio de primeira linha usando usinagem CNC avançada, este potenciômetro transforma cada estrada ou trilha em uma nova aventura. Você obtém resistência superior sem sacrificar leveza ou agilidade. Para quem deseja precisão, a construção deste componente traz confiança a cada curva e descida. Enquanto outros potenciômetros podem fazer concessões, este equilibra perfeitamente rigidez e refinamento, oferecendo controle incomparável sobre seu passeio.

Libere Versatilidade em Todo Terreno

Sua jornada pode levá-lo de ruas da cidade a caminhos de montanha acidentados, e a Potência MTB 45mm MIXED se adapta perfeitamente. Seu comprimento de 45mm engenhosamente projetado otimiza seu manuseio, fornecendo conforto quer você enfrente trilhas técnicas ou passeie por estradas urbanas. A pinça universal de 35mm se encaixa na maioria dos guidões modernos, oferecendo compatibilidade perfeita entre várias bicicletas. Além disso, o design da potência garante instalação fácil e se combina perfeitamente com diferentes componentes de ciclismo, tornando atualizações e ajustes sem complicações.

Estilo e Durabilidade em Perfeita Harmonia

A durabilidade é essencial para qualquer ciclista sério. O alumínio de alta qualidade deste espigão resiste ao desgaste e choque, permitindo que você vá mais longe sem preocupações. O acabamento anodizado repele corrosão e adiciona apelo visual elegante ao seu passeio. Se você quer impressionar na próxima competição ou expressar sua individualidade em passeios do dia a dia, este espigão oferece beleza duradoura bem como desempenho. Além disso, detalhamento CNC dá a cada aresta um visual nítido e moderno que se destaca em qualquer grupo.

Sinta Cada Passeio, Experimente Verdadeira Conexão

Com a Potência MTB 45mm MIXED, sua bicicleta se torna uma extensão do seu corpo. Cada movimento, desde curvas fechadas até aceleração rápida, se sente natural e intuitivo. Porque a potência mantém um equilíbrio perfeito entre flexão e rigidez, a fadiga diminui e o controle aumenta. Como resultado, você ganha uma sensação intensificada de conexão, transformando pedaladas ordinárias em experiências inesquecíveis. Equipe sua bicicleta com esta peça inovadora e abrace um novo nível de paixão pelo ciclismo em cada jornada.

 

Color

Black

Material

Carbon

Brand

MIXED

Size

‎Large

Weight

0.2

Shop

Aliexpress

5 reviews for Avanço MTB MIXED 45mm para Guidão 35mm Alumínio CNC Componentes de Ciclismo Bicicleta Mountain Road

  1. К***ч

    For such a price, it’s hard to complain, probably, but I didn’t like it. The edges are sharp, a thin layer of glossy paint underneath which shows traces of milling, all of this looks cheap. I liked the bolts, M5 for torque, not magnetic but also don’t look like stainless steel, like titanium? In general, 4 stars, I think it’s fair. You can take it if you don’t want to wait for super external parts.

  2. А***а

    I was pleasantly surprised that the version with bolts for Torx T25 (made of stainless steel?) arrived. and branded with the vyse logo on the lid. Although the quality of the finishing is not up to par with the branded ones, it is quite decent, without very sharp edges. The packaging is also great. But the design itself is fundamentally flawed in terms of the ratio of toughness to weight. Despite the overall bulk, due to the design, too much metal was chosen on the rod clamp side, so after degreasing and tightening it to 5nm, it can be twisted with a little effort by hand. I had to stretch it further. You can also see how the metal stretches and deforms when tightening on the rod, and the upper part of the clamp bends relative to the lower part when tightening the anchor bolt. 🙉 But on the steering wheel side, it holds tightly. Adding some meat on the side of the rod, and it would be a working extension with a cool lid design, otherwise, well, who knows.

  3. Б***ч

    The selection of pins on a Alik under 35 steering wheel is quite limited. I needed a 45-50 mm stem. , this one seemed to be the most suitable. There is milling available, the packaging in a branded box was pleasant. To my taste, not the most beautiful stem, but my concept is great on the components from alika and ozone)))

  4. K***k

    Ok

  5. R***o

    Looks good. Dimensions match. The price was on sale. My concerns are the thin wall near the steering pipe and small screws.

Only logged in customers who have purchased this product may leave a review.

For such a price, it's hard to complain, probably, but I didn't like it. The edges are sharp, a thin layer of glossy paint underneath which shows traces of milling, all of this looks cheap. I liked the bolts, M5 for torque, not magnetic but also don't look like stainless steel, like titanium? In general, 4 stars, I think it's fair. You can take it if you don't want to wait for super external parts.
I was pleasantly surprised that the version with bolts for Torx T25 (made of stainless steel?) arrived. and branded with the vyse logo on the lid. Although the quality of the finishing is not up to par with the branded ones, it is quite decent, without very sharp edges. The packaging is also great. But the design itself is fundamentally flawed in terms of the ratio of toughness to weight. Despite the overall bulk, due to the design, too much metal was chosen on the rod clamp side, so after degreasing and tightening it to 5nm, it can be twisted with a little effort by hand. I had to stretch it further. You can also see how the metal stretches and deforms when tightening on the rod, and the upper part of the clamp bends relative to the lower part when tightening the anchor bolt. 🙉 But on the steering wheel side, it holds tightly. Adding some meat on the side of the rod, and it would be a working extension with a cool lid design, otherwise, well, who knows.
The selection of pins on a Alik under 35 steering wheel is quite limited. I needed a 45-50 mm stem. , this one seemed to be the most suitable. There is milling available, the packaging in a branded box was pleasant. To my taste, not the most beautiful stem, but my concept is great on the components from alika and ozone)))
Ok
Looks good. Dimensions match. The price was on sale. My concerns are the thin wall near the steering pipe and small screws.