MIXED • Oficjalna Strona Internetowa

MIXED MTB Trzpień 45mm Do kierownicy 35mm Aluminium CNC Rower górski Rower drogowy Komponenty rowerowe Części

Original price was: €29.85.Current price is: €12.52.
SKU: F8AA1E1A Category:

Precyzjna inżynieria spotyka się z odważną wydajnością

Podnieś swoją jazdę dzięki wyciągowi MIXED MTB 45mm dla kierownicy 35mm. Wykonany z najwyższej klasy aluminium przy użyciu zaawansowanego obróbki CNC, ten wysięgnik zamienia każdą drogę lub szlak w nową przygodę. Uzyskujesz wyższą wytrzymałość bez poświęcania lekkości lub zwinności. Dla tych, którzy pragną precyzji, konstrukcja tego komponentu wnosi pewność do każdego zakrętu i zjazdu. Podczas gdy inne wyciągi mogą pójść na kompromisy, ten osiąga ostateczną równowagę między sztywnością a finezją, dając Ci niezrównaną kontrolę nad jazdą.

Uwolnij wszechstronność na każdym terenie

Twoja podróż może zabrać Cię od ulic miasta do pokrytych ścieżek górskich, a MIXED MTB 45mm Stem dostosowuje się bezproblemowo. Jego starannie opracowana długość 45mm optymalizuje Twoją obsługę, zapewniając komfort, niezależnie od tego, czy pokonujesz techniczne szlaki lub krążysz po mieście. Uniwersalny zacisk 35mm pasuje do większości nowoczesnych kierownic, zapewniając bezproblemową kompatybilność między różnymi rowerami. Ponadto projekt piastka zapewnia łatwe zainstalowanie i doskonale się łączy z różnymi komponentami rowerowymi, co czyni ulepszenia i regulacje bez problemów.

Styl i trwałość w idealnej harmonii

Trwałość jest kluczowa dla każdego poważnego kolarza. Przednia część tego rury z wysokiej klasy aluminium opiera się zużyciu i wstrząsom, pozwalając Ci na przygody dalej bez obaw. Anodowana powłoka chroni przed korozją i dodaje elegancki wizualny urok do Twojej jazdy. Niezależnie od tego, czy chcesz zrobić wrażenie na następnej konkurencji czy wyrazić indywidualność na codziennych jazdach, ta rura dostarcza trwałą piękność oraz wydajność. Ponadto detale CNC dają każdej krawędzi ostre, nowoczesne wygląd, który wyróżnia się w każdej grupie.

Czuj każdą jazdę, doświadcz prawdziwego połączenia

Z MIXED MTB 45mm Stem Twój rower staje się rozszerzeniem Twojego ciała. Każdy ruch, od ciasnych zakrętów do szybkiego przyspieszenia, wydaje się naturalny i intuicyjny. Ponieważ piastek utrzymuje doskonałą równowagę między giętką a sztywnością, zmęczenie maleje, a kontrola wzrasta. W rezultacie zyskujesz wzmocnione poczucie połączenia, zamieniając zwyczajne przejazdy w niezapomniane doświadczenia. Wyposażyć swój rower w tę innowacyjną część i wkrocz na nowy poziom pasji do kolarstwa z każdą podróżą.

 

Color

Black

Material

Carbon

Brand

MIXED

Size

‎Large

Weight

0.2

Shop

Aliexpress

5 reviews for MIXED MTB Trzpień 45mm Do kierownicy 35mm Aluminium CNC Rower górski Rower drogowy Komponenty rowerowe Części

  1. К***ч

    For such a price, it’s hard to complain, probably, but I didn’t like it. The edges are sharp, a thin layer of glossy paint underneath which shows traces of milling, all of this looks cheap. I liked the bolts, M5 for torque, not magnetic but also don’t look like stainless steel, like titanium? In general, 4 stars, I think it’s fair. You can take it if you don’t want to wait for super external parts.

  2. А***а

    I was pleasantly surprised that the version with bolts for Torx T25 (made of stainless steel?) arrived. and branded with the vyse logo on the lid. Although the quality of the finishing is not up to par with the branded ones, it is quite decent, without very sharp edges. The packaging is also great. But the design itself is fundamentally flawed in terms of the ratio of toughness to weight. Despite the overall bulk, due to the design, too much metal was chosen on the rod clamp side, so after degreasing and tightening it to 5nm, it can be twisted with a little effort by hand. I had to stretch it further. You can also see how the metal stretches and deforms when tightening on the rod, and the upper part of the clamp bends relative to the lower part when tightening the anchor bolt. 🙉 But on the steering wheel side, it holds tightly. Adding some meat on the side of the rod, and it would be a working extension with a cool lid design, otherwise, well, who knows.

  3. Б***ч

    The selection of pins on a Alik under 35 steering wheel is quite limited. I needed a 45-50 mm stem. , this one seemed to be the most suitable. There is milling available, the packaging in a branded box was pleasant. To my taste, not the most beautiful stem, but my concept is great on the components from alika and ozone)))

  4. K***k

    Ok

  5. R***o

    Looks good. Dimensions match. The price was on sale. My concerns are the thin wall near the steering pipe and small screws.

Only logged in customers who have purchased this product may leave a review.

For such a price, it's hard to complain, probably, but I didn't like it. The edges are sharp, a thin layer of glossy paint underneath which shows traces of milling, all of this looks cheap. I liked the bolts, M5 for torque, not magnetic but also don't look like stainless steel, like titanium? In general, 4 stars, I think it's fair. You can take it if you don't want to wait for super external parts.
I was pleasantly surprised that the version with bolts for Torx T25 (made of stainless steel?) arrived. and branded with the vyse logo on the lid. Although the quality of the finishing is not up to par with the branded ones, it is quite decent, without very sharp edges. The packaging is also great. But the design itself is fundamentally flawed in terms of the ratio of toughness to weight. Despite the overall bulk, due to the design, too much metal was chosen on the rod clamp side, so after degreasing and tightening it to 5nm, it can be twisted with a little effort by hand. I had to stretch it further. You can also see how the metal stretches and deforms when tightening on the rod, and the upper part of the clamp bends relative to the lower part when tightening the anchor bolt. 🙉 But on the steering wheel side, it holds tightly. Adding some meat on the side of the rod, and it would be a working extension with a cool lid design, otherwise, well, who knows.
The selection of pins on a Alik under 35 steering wheel is quite limited. I needed a 45-50 mm stem. , this one seemed to be the most suitable. There is milling available, the packaging in a branded box was pleasant. To my taste, not the most beautiful stem, but my concept is great on the components from alika and ozone)))
Ok
Looks good. Dimensions match. The price was on sale. My concerns are the thin wall near the steering pipe and small screws.