MIXED • Officiële Website

MIXED MTB 45mm Stuurpen Voor 35mm Stuur Aluminium CNC Mountain Road Bike Fiets Fietscomponenten Onderdelen

Original price was: €29.85.Current price is: €12.52.
SKU: F8AA1E1A Category:

Precisie-engineering ontmoet uitstekende prestaties

Til je rit naar een hoger niveau met de MIXED MTB 45mm Voorbuis voor 35mm Stuur. Vervaardigd uit eersteklas aluminium met behulp van geavanceerde CNC-bewerking, transformeert deze voorbuis elke weg of trail in een nieuw avontuur. Je krijgt superieure sterkte zonder in te boeten op lichtgewicht of wendbaarheid. Voor degenen die precisie nastreven, brengt deze component's constructie vertrouwen op elke bocht en afdaling. Terwijl andere voorbuizen wellicht compromissen sluiten, vindt deze één de ultieme balans tussen stijfheid en finesse, wat je ongeëvenaarde controle over je rit geeft.

Ontgrendel Veelzijdigheid op Elk Terrein

Je reis kan je van stadsstraten naar ruwe bergpaden voeren, en de MIXED MTB 45mm Voorvork past naadloos aan. De doordacht ontworpen 45 mm lengte optimaliseert je handling en biedt comfort, of je nu technische trails aanpakt of urban roads afstapt. De universele 35 mm klem past op de meeste moderne sturen, wat naadloze compatibiliteit tussen verschillende fietsen biedt. Bovendien zorgt het ontwerp van de voorvork voor gemakkelijke installatie en combineert perfect met verschillende cycling componenten, wat upgrades en aanpassingen zonder gedoe maakt.

Stijl en Duurzaamheid in Perfecte Harmonie

Duurzaamheid is essentieel voor elke serieuze fietser. Het aluminium van hoge kwaliteit van deze voorvork weerstaat slijtage en schokken, waardoor u verder kunt gaan zonder zorgen. De geanodiseerde afwerking beschermt tegen corrosie en voegt visueel aantrekkingskracht toe aan uw rit. Of u nu indruk wilt maken op de volgende competitie of uw individualiteit op dagelijkse ritten wilt uitdrukken, deze voorvork biedt zowel blijvende schoonheid als prestaties. Bovendien geeft CNC-detaillering elke rand een scherp, modern uiterlijk dat opvalt in elke groep.

Voel elke rit, ervaar echte verbinding

Met de MIXED MTB 45mm Voorvork wordt je fiets een verlengstuk van je lichaam. Elke beweging, van strakke bochten tot snelle versnelling, voelt natuurlijk en intuïtief. Omdat de voorvork een perfect evenwicht tussen buigzaamheid en stijfheid behoudt, neemt vermoeidheid af en controle toe. Als gevolg daarvan krijg je een verhoogd gevoel van verbinding, waardoor gewone ritten onvergetelijke ervaringen worden. Uit je fiets uit met dit innovatieve onderdeel en omarm een nieuw niveau van cycling passie bij elke rit.

 

Color

Black

Material

Carbon

Brand

MIXED

Size

‎Large

Weight

0.2

Shop

Aliexpress

5 reviews for MIXED MTB 45mm Stuurpen Voor 35mm Stuur Aluminium CNC Mountain Road Bike Fiets Fietscomponenten Onderdelen

  1. К***ч

    For such a price, it’s hard to complain, probably, but I didn’t like it. The edges are sharp, a thin layer of glossy paint underneath which shows traces of milling, all of this looks cheap. I liked the bolts, M5 for torque, not magnetic but also don’t look like stainless steel, like titanium? In general, 4 stars, I think it’s fair. You can take it if you don’t want to wait for super external parts.

  2. А***а

    I was pleasantly surprised that the version with bolts for Torx T25 (made of stainless steel?) arrived. and branded with the vyse logo on the lid. Although the quality of the finishing is not up to par with the branded ones, it is quite decent, without very sharp edges. The packaging is also great. But the design itself is fundamentally flawed in terms of the ratio of toughness to weight. Despite the overall bulk, due to the design, too much metal was chosen on the rod clamp side, so after degreasing and tightening it to 5nm, it can be twisted with a little effort by hand. I had to stretch it further. You can also see how the metal stretches and deforms when tightening on the rod, and the upper part of the clamp bends relative to the lower part when tightening the anchor bolt. 🙉 But on the steering wheel side, it holds tightly. Adding some meat on the side of the rod, and it would be a working extension with a cool lid design, otherwise, well, who knows.

  3. Б***ч

    The selection of pins on a Alik under 35 steering wheel is quite limited. I needed a 45-50 mm stem. , this one seemed to be the most suitable. There is milling available, the packaging in a branded box was pleasant. To my taste, not the most beautiful stem, but my concept is great on the components from alika and ozone)))

  4. K***k

    Ok

  5. R***o

    Looks good. Dimensions match. The price was on sale. My concerns are the thin wall near the steering pipe and small screws.

Only logged in customers who have purchased this product may leave a review.

For such a price, it's hard to complain, probably, but I didn't like it. The edges are sharp, a thin layer of glossy paint underneath which shows traces of milling, all of this looks cheap. I liked the bolts, M5 for torque, not magnetic but also don't look like stainless steel, like titanium? In general, 4 stars, I think it's fair. You can take it if you don't want to wait for super external parts.
I was pleasantly surprised that the version with bolts for Torx T25 (made of stainless steel?) arrived. and branded with the vyse logo on the lid. Although the quality of the finishing is not up to par with the branded ones, it is quite decent, without very sharp edges. The packaging is also great. But the design itself is fundamentally flawed in terms of the ratio of toughness to weight. Despite the overall bulk, due to the design, too much metal was chosen on the rod clamp side, so after degreasing and tightening it to 5nm, it can be twisted with a little effort by hand. I had to stretch it further. You can also see how the metal stretches and deforms when tightening on the rod, and the upper part of the clamp bends relative to the lower part when tightening the anchor bolt. 🙉 But on the steering wheel side, it holds tightly. Adding some meat on the side of the rod, and it would be a working extension with a cool lid design, otherwise, well, who knows.
The selection of pins on a Alik under 35 steering wheel is quite limited. I needed a 45-50 mm stem. , this one seemed to be the most suitable. There is milling available, the packaging in a branded box was pleasant. To my taste, not the most beautiful stem, but my concept is great on the components from alika and ozone)))
Ok
Looks good. Dimensions match. The price was on sale. My concerns are the thin wall near the steering pipe and small screws.