MIXED • Oficiální web

MIXED MTB 45mm řídítka pro 35mm řídítko hliník CNC horské silniční kolo cyklistické součásti

Original price was: €29.85.Current price is: €12.52.
SKU: F8AA1E1A Category:

Přesné inženýrství se potkává s odlišným výkonem

Zvyšte vaši jízdu pomocí představu MIXED MTB 45mm pro 35mm řídítka. Vyrobený z prvotřídního hliníku pomocí pokročilého CNC obrábění, tato představu změní každou cestu na silnici nebo na stezce na nové dobrodružství. Získáte nadřazenou pevnost bez obětování lehkosti nebo hbitosti. Pro ty, kteří touží po přesnosti, konstrukce této součástky přináší důvěru do každé zatáčky a sjezdu. Zatímco jiné představu by mohly jít na kompromis, tato dosahuje dokonalé rovnováhy mezi tuhostí a jemností, čímž vám dává bezkonkurenční kontrolu nad vaší jízdou.

Uvolněte všestrannost na každém terénu

Vaše cesta vás může vést z městských ulic na klučistou horskou trať a horská řídící trubka MIXED MTB 45mm se bezchybně přizpůsobí. Její promyšleně konstruovaná délka 45mm optimalizuje vaši řiditelnost a poskytuje pohodlí, ať už řešíte technické stezky nebo se vozíte městskými cestami. Univerzální zámek 35mm se hodí na většinu moderních řídítek, což zajišťuje bezproblémovou kompatibilitu s různými koly. Navíc design řídící trubky zajišťuje snadnou instalaci a dokonale se kombinuje s různými cyklistickými komponenty, takže upgrady a úpravy jsou bez potíží.

Styl a odolnost v dokonalé harmonii

Odolnost je klíčová pro každého vážného cyklistu. Tento představec z kvalitní hliníkové slitiny odolává opotřebení a nárazům, což vám umožňuje cestovat dále bez obav. Anodizovaný povrch odolává korozi a dodává vaší jízdě elegantní vzhled. Ať už chcete zapůsobit na příští soutěži nebo vyjádřit svou individualitu při běžných jízdách, tento představec poskytuje jak trvalou krásu, tak výkon. Navíc CNC detailování dává každé hraně ostrý, moderní vzhled, který vynikne v jakékoli skupině.

Cítěte každou jízdu, zažijte opravdové spojení

S horskou řídící trubkou MIXED MTB 45mm se vaše kolo stane prodloužením vašeho těla. Každý pohyb, od těsných zákrut k rychlému zrychlení, se cítí přírodně a intuitivně. Protože řídící trubka udržuje dokonalý poměr pružnosti a tuhosti, únava se snižuje a kontrola se zvyšuje. V důsledku toho získáte zvýšené pocity spojení a běžné jízdy se změní na nezapomenutelné zážitky. Vybavte své kolo touto inovativní součástí a přijměte nový level cyklistické vášně s každou cestou.

 

Color

Black

Material

Carbon

Brand

MIXED

Size

‎Large

Weight

0.2

Shop

Aliexpress

5 reviews for MIXED MTB 45mm řídítka pro 35mm řídítko hliník CNC horské silniční kolo cyklistické součásti

  1. К***ч

    For such a price, it’s hard to complain, probably, but I didn’t like it. The edges are sharp, a thin layer of glossy paint underneath which shows traces of milling, all of this looks cheap. I liked the bolts, M5 for torque, not magnetic but also don’t look like stainless steel, like titanium? In general, 4 stars, I think it’s fair. You can take it if you don’t want to wait for super external parts.

  2. А***а

    I was pleasantly surprised that the version with bolts for Torx T25 (made of stainless steel?) arrived. and branded with the vyse logo on the lid. Although the quality of the finishing is not up to par with the branded ones, it is quite decent, without very sharp edges. The packaging is also great. But the design itself is fundamentally flawed in terms of the ratio of toughness to weight. Despite the overall bulk, due to the design, too much metal was chosen on the rod clamp side, so after degreasing and tightening it to 5nm, it can be twisted with a little effort by hand. I had to stretch it further. You can also see how the metal stretches and deforms when tightening on the rod, and the upper part of the clamp bends relative to the lower part when tightening the anchor bolt. 🙉 But on the steering wheel side, it holds tightly. Adding some meat on the side of the rod, and it would be a working extension with a cool lid design, otherwise, well, who knows.

  3. Б***ч

    The selection of pins on a Alik under 35 steering wheel is quite limited. I needed a 45-50 mm stem. , this one seemed to be the most suitable. There is milling available, the packaging in a branded box was pleasant. To my taste, not the most beautiful stem, but my concept is great on the components from alika and ozone)))

  4. K***k

    Ok

  5. R***o

    Looks good. Dimensions match. The price was on sale. My concerns are the thin wall near the steering pipe and small screws.

Only logged in customers who have purchased this product may leave a review.

For such a price, it's hard to complain, probably, but I didn't like it. The edges are sharp, a thin layer of glossy paint underneath which shows traces of milling, all of this looks cheap. I liked the bolts, M5 for torque, not magnetic but also don't look like stainless steel, like titanium? In general, 4 stars, I think it's fair. You can take it if you don't want to wait for super external parts.
I was pleasantly surprised that the version with bolts for Torx T25 (made of stainless steel?) arrived. and branded with the vyse logo on the lid. Although the quality of the finishing is not up to par with the branded ones, it is quite decent, without very sharp edges. The packaging is also great. But the design itself is fundamentally flawed in terms of the ratio of toughness to weight. Despite the overall bulk, due to the design, too much metal was chosen on the rod clamp side, so after degreasing and tightening it to 5nm, it can be twisted with a little effort by hand. I had to stretch it further. You can also see how the metal stretches and deforms when tightening on the rod, and the upper part of the clamp bends relative to the lower part when tightening the anchor bolt. 🙉 But on the steering wheel side, it holds tightly. Adding some meat on the side of the rod, and it would be a working extension with a cool lid design, otherwise, well, who knows.
The selection of pins on a Alik under 35 steering wheel is quite limited. I needed a 45-50 mm stem. , this one seemed to be the most suitable. There is milling available, the packaging in a branded box was pleasant. To my taste, not the most beautiful stem, but my concept is great on the components from alika and ozone)))
Ok
Looks good. Dimensions match. The price was on sale. My concerns are the thin wall near the steering pipe and small screws.