MIXED • Официален уебсайт

MIXED MTB 45mm Stem За 35mm Handlerbar Aluminum CNC Mountain Road Bike Cycling Bicycle Components Parts

Original price was: €29.85.Current price is: €12.52.
SKU: F8AA1E1A Category:

Прецизионното инженерство се среща с дръзка производителност

Издигнете вашето пътешествие с MIXED MTB 45mm потрубието за кормило 35mm. Изработено от висококачествен алуминий с помощта на напредната CNC обработка, това потрубие превръща всеки път или пътека в ново приключение. Получавате превъзходна сила без жертване на лекота или съпротива. За тези, които искат точност, конструкцията на този компонент носи уверност при всеки завой и спускане. Докато други потрубия могат да направят компромис, това постига върховния баланс между жесткост и финес, давайки ви непревзойден контрол над вашето пътешествие.

Освободете универсалност на всеки терен

Вашето пътешествие може да ви отведе от градските улици до сурови планински пътеки, и MIXED MTB 45mm Stem се адаптира безпроблемно. Неговата внимателно проектирана дължина от 45mm оптимизира вашия хендлинг, осигурявайки комфорт независимо дали се справяте с технически пътеки или крайзирате град. Универсалното 35mm затягане е съвместимо с повечето съвременни ръководилки, осигурявайки безпроблемна съвместимост между различни велосипеди. Освен това, дизайнът на стема гарантира лесна инсталация и се комбинира перфектно с различни велосипедни компоненти, което прави надстройките и регулировките безпроблемни.

Стил и издържливост в идеална хармония

Трайността е ключ за всеки сериозен велосипедист. Лебедката на този стъбилец с висока степен на алуминий устоява на износка и удари, позволявайки ви да пътешествувате по-далеч без загрижване. Анодизираното покритие отблъсква корозията и добавя елегантен визуален апел на вашата разходка. Независимо дали целите да впечатлите на следващото състезание или да изразите вашата индивидуалност на ежедневни разходки, този стъбилец доставя трайна красота както и производителност. Освен това CNC детайлите дават всеки край остър, модерен вид, който се откроява в всяка група.

Почувствайте всяко пътуване, преживейте истинската връзка

С MIXED MTB 45mm Stem, вашият велосипед се превръща в продължение на вашето тяло. Всяко движение, от тесни завои до бързо ускорение, се чувства естествено и интуитивно. Поради това, че стемът поддържа перфектен баланс между гъвкавост и твърдост, умората намалява и контролът се увеличава. В резултат, вие получавате повишено чувство на връзка, превръщайки обикновенитe езди в незабравими преживявания. Оборудвайте вашия велосипед с този иновативен част и прегърнете ново ниво на велосипедна страст със всяко пътешествие.

 

Color

Black

Material

Carbon

Brand

MIXED

Size

‎Large

Weight

0.2

Shop

Aliexpress

5 reviews for MIXED MTB 45mm Stem За 35mm Handlerbar Aluminum CNC Mountain Road Bike Cycling Bicycle Components Parts

  1. К***ч

    For such a price, it’s hard to complain, probably, but I didn’t like it. The edges are sharp, a thin layer of glossy paint underneath which shows traces of milling, all of this looks cheap. I liked the bolts, M5 for torque, not magnetic but also don’t look like stainless steel, like titanium? In general, 4 stars, I think it’s fair. You can take it if you don’t want to wait for super external parts.

  2. А***а

    I was pleasantly surprised that the version with bolts for Torx T25 (made of stainless steel?) arrived. and branded with the vyse logo on the lid. Although the quality of the finishing is not up to par with the branded ones, it is quite decent, without very sharp edges. The packaging is also great. But the design itself is fundamentally flawed in terms of the ratio of toughness to weight. Despite the overall bulk, due to the design, too much metal was chosen on the rod clamp side, so after degreasing and tightening it to 5nm, it can be twisted with a little effort by hand. I had to stretch it further. You can also see how the metal stretches and deforms when tightening on the rod, and the upper part of the clamp bends relative to the lower part when tightening the anchor bolt. 🙉 But on the steering wheel side, it holds tightly. Adding some meat on the side of the rod, and it would be a working extension with a cool lid design, otherwise, well, who knows.

  3. Б***ч

    The selection of pins on a Alik under 35 steering wheel is quite limited. I needed a 45-50 mm stem. , this one seemed to be the most suitable. There is milling available, the packaging in a branded box was pleasant. To my taste, not the most beautiful stem, but my concept is great on the components from alika and ozone)))

  4. K***k

    Ok

  5. R***o

    Looks good. Dimensions match. The price was on sale. My concerns are the thin wall near the steering pipe and small screws.

Only logged in customers who have purchased this product may leave a review.

For such a price, it's hard to complain, probably, but I didn't like it. The edges are sharp, a thin layer of glossy paint underneath which shows traces of milling, all of this looks cheap. I liked the bolts, M5 for torque, not magnetic but also don't look like stainless steel, like titanium? In general, 4 stars, I think it's fair. You can take it if you don't want to wait for super external parts.
I was pleasantly surprised that the version with bolts for Torx T25 (made of stainless steel?) arrived. and branded with the vyse logo on the lid. Although the quality of the finishing is not up to par with the branded ones, it is quite decent, without very sharp edges. The packaging is also great. But the design itself is fundamentally flawed in terms of the ratio of toughness to weight. Despite the overall bulk, due to the design, too much metal was chosen on the rod clamp side, so after degreasing and tightening it to 5nm, it can be twisted with a little effort by hand. I had to stretch it further. You can also see how the metal stretches and deforms when tightening on the rod, and the upper part of the clamp bends relative to the lower part when tightening the anchor bolt. 🙉 But on the steering wheel side, it holds tightly. Adding some meat on the side of the rod, and it would be a working extension with a cool lid design, otherwise, well, who knows.
The selection of pins on a Alik under 35 steering wheel is quite limited. I needed a 45-50 mm stem. , this one seemed to be the most suitable. There is milling available, the packaging in a branded box was pleasant. To my taste, not the most beautiful stem, but my concept is great on the components from alika and ozone)))
Ok
Looks good. Dimensions match. The price was on sale. My concerns are the thin wall near the steering pipe and small screws.